Guide
Lat pulldown alternatives, chosen by what the week's pulling needs
A lat pulldown is one slot in a week of pulling. Decide how many sets this client needs overhead, then replace the pulldown for the equipment, the shoulders, and the elbows in front of you.
By RaiNGE product teamUpdated 8 min read
Written for coaches replacing the lat pulldown when there is no machine, the shoulders object, or the goal is the pull-up.
See where a lat pulldown and a pull-up share a week with a chest-supported row, and where a swap fits around them. See the 3-day program
On this pageCount the week's pulling sets before you replace anything
Count the week's pulling sets before you replace anything
A pulldown is rarely a client's only pull. Before you swap it, count the weekly pulling sets and ask two questions: does this client need a vertical pull at all, and how many sets should it carry? The goal answers both.
Pull-ups and lat size need a vertical pull, so keep one. General back strength can run on rows alone, so a missing machine needs no like-for-like replacement. The table gives a starting split for a client who trains pulling twice a week.
For scale, the 3-day full body program runs 10 pulling sets a week, 6 vertical and 4 horizontal: 4 chest-supported rows on Monday, 3 lat pulldowns on Wednesday, and 3 pull-ups, assisted if needed, on Friday. When one slot has to change, move its sets to the nearest slot you can run, so the weekly total holds.
Then pick the replacement by why the pulldown has to go
Once the vertical share is set, the reason the machine is out picks the replacement. Where two reasons apply, such as no machine and a sore shoulder, start from the shoulder line and keep only the options the equipment allows.
Five replacements, closest to the pulldown first
The first replacement keeps the most of the pulldown: a vertical pull with the hands on a handle. Each step down changes more, and the last one moves the work to the horizontal share.
- 1
Band-anchored pulldown
Use it when the client has bands and a safe anchor above head height, such as a door anchor on a closed door or a band looped over a sturdy bar. Kneel or half-kneel, pull the elbows down to the ribs, and keep the shoulders down instead of shrugging. Check the band and the anchor before the first set.
- 2
Assisted pull-up
Use it when a bar is available and the goal is the pull-up or lat size with body weight. A band looped over the bar and under the knee or foot gives the help, and it helps most at the bottom and least at the top. The pull-up progression has the band steps and the move-up rules.
- 3
Straight-arm band pulldown
Use it when bending the elbows is the problem, or the shoulder wants a shorter range. Start with the hands at head height and the arms nearly straight, then sweep the hands to the thighs without bending the elbows or leaning forward. Use a light band and read the effort at the end of the set.
- 4
Dumbbell pullover
Use it when dumbbells are the only equipment. Lie on a bench or the floor, hold one dumbbell over the chest with both hands, lower it behind the head only as far as the ribs stay down, and pull it back over the chest. Keep it light: the shoulders set the range.
- 5
Inverted row
Use it for the horizontal share, or when there is no vertical option at all. Set a bar at hip height in a rack, or use rings or a suspension trainer, with the heels on the floor and the body in one line. For a pull-up goal it supports the vertical work and does not replace it.
Carry 3×10 over, and set the load by effort
Starting points for when the program said 3×10 lat pulldowns. A cable stack, a band, and a body-weight pull do not share a unit, so the old number is no guide. Warm up, take a first set that leaves 2-3 reps in reserve (RPE 7-8), write down the band, the anchor height, and the distance from the anchor, and confirm it in session two.
Worked example. One client does 3×10 lat pulldowns at 50 kg (110 lb) in the gym. Their week also holds 8 row sets, so the budget is 11 sets: 3 vertical and 8 horizontal, inside the general-strength split above. They now train at home with loop bands and a doorway bar rated for their weight. Keep the 11 sets and move each slot. The 8 row sets become one-arm dumbbell rows and inverted rows, and the 3 vertical sets become band-anchored pulldowns.
Do not hunt for a band that equals 50 kg. A band's label gives its tension at one stretch, and the load changes through the rep. Warm up with a light band for 10 reps, then take a first work set of 10 with the band you expect to fit. If it finishes with three reps in reserve (RPE 7), that band is the load, so run 3×10. If set 3 reaches RPE 9, use the next lighter band next session. If all three sets stay at RPE 7 or less for two sessions, move up one band and return to 10 reps.
When reaching overhead hurts the shoulder or the elbows
On a pulldown, range is the usual first fix at 3-5/10: start each rep with the hands at forehead height instead of fully overhead, or use a lighter band. The setup comes next, with the anchor lowered to head height or a neutral grip. Only then change the exercise, to a straight-arm pulldown or a row. The pain scale guide covers each band, and the referral guide lists the signs that move a decision out of coaching.
In RaiNGE, when a coach asks for a swap, the AI suggests a few alternatives, the safety rules drop any that conflict with the client's flags, and cautioned options are listed last. A shoulder flag on the client profile keeps hanging work, overhead pressing, bench and chest press variations, push-ups, and dips out of the AI draft. Cautions are shown to the coach, who decides what fills the slot and when anything returns. The pulldown, pull-up, and row options on this page are coaching suggestions, not a statement of which ones those rules keep.
Common questions
Can rows replace lat pulldowns completely?
For general back strength, often yes: 8-12 row sets a week across two sessions is a workable start. For a pull-up or lat-size goal, keep some vertical work, because rows do not practice the overhead reach or the vertical path.
What is the difference between a lat pulldown and a pull-up?
On a pulldown the client sits and the bar moves, so the load is a pin on a stack and changes in small steps. On a pull-up the body moves under a fixed bar, so the load is body weight and the trunk and grip work too. A pulldown builds pulling strength, but it does not replace hangs and slow lowerings for a pull-up goal.
What if the bands are too light for a strong client?
Add difficulty one change at a time: a 3-second lowering first, then a doubled or thicker band, then a start further from the anchor. If the set is still easy, move volume to rows and to pull-ups on the bar, where body weight sets the load. Record the setup each time.