Skip to content

Guide

A pull-up progression that takes a client from no pull-ups to the first strict rep

A push-up regression scales a rep down. A first pull-up has no rep to scale, so it is built from three tracks at once: hanging, rowing, and slow lowering, each with its own move-up rule.

By RaiNGE product teamUpdated 8 min read

Written for coaches taking a client from no pull-ups to the first strict rep.

Short answer

A pull-up progression builds hanging, rowing, and lowering strength together: active hangs, scapular pulls, inverted rows, assisted pull-ups, slow lowerings, then a chin-up before the first strict pull-up. Place the client by what they can do today, and move up a rung only when reps, tempo, and shoulder position are clean.

  • Test three things in the first session: a hang, an inverted row, and a slow lowering from the top. The weakest of the three sets the starting rung.
  • Train hangs, rows, and lowerings in the same week. A first rep needs all three.
  • Move up on clean reps: shoulders down, no swing, and a last rep that looks like the first.
  • Elbow or shoulder pain at any rung goes to the pain bands before the next rung.

See where the pull-up (assisted if needed) sits on Upper B, and how the rest of the week is built around it. See the 4-day program

On this pagePlace the client by what they can do today

Place the client by what they can do today

A push-up regression ladder works down from an exercise: each step makes today's push-up easier. A pull-up progression works up from zero, because the client has no honest version of the rep yet. The push-up regressions guide covers the first case. This page covers the second.

A first pull-up needs three things: grip and shoulder tolerance from hanging, pulling strength through the middle range from rows, and strength at the top from slow lowerings. Test all three in session one: the weakest sets the starting rung, and the other two train beside it. The first three rows below are limits, so start at the first one that applies. If none does, take the highest of the last three rows the client meets. Treat every number in the table as a starting point.

Where to start a client, from what they can do today.
What the client can do todayStart atWhy
Cannot hang for 15 seconds with the shoulders downActive hangHanging tolerance is the limit. Train rows beside it from day one.
Holds a 15-second active hang, but the shoulders ride up toward the ears when the pull startsScapular pullThe first inch of every pull comes from the shoulder blades.
Fewer than 8 inverted rows with the bar at hip heightInverted rowPulling strength is the limit. Keep hangs as the warm-up.
8 or more inverted rows at hip height and no pull-upsAssisted pull-up, with rows at a steeper angle on the same dayThe rowing strength is there. The top of the range is what is missing.
Three slow lowerings of 3 seconds from the topSlow lowering, building from 4 to 5 seconds, then the chin-upThe top of the range is owned. Lengthen the lowering, then add the pull.
One strict chin-up and no strict pull-upChin-up sets, then the pull-up gripThe first rep exists. Build it before changing the grip.
Where to start a client, from what they can do today.

The eight rungs, with a start and a move-up rule for each

Clean means the shoulders stay down and away from the ears, the body does not swing, and the last rep looks like the first. A rep that needs a kick or a shrug does not count toward a move-up rule.

  1. 1

    Active hang

    Hang with straight arms, the shoulders pulled down and slightly back, and the ribs down. Start at 3×10-20 seconds. Move up when 3×30 seconds stay clean, with no elbow or shoulder pain.

  2. 2

    Scapular pull

    From the active hang, pull the shoulder blades down without bending the elbows, so the body rises an inch or two. Start at 3×6-8 with a 1-second pause. Move up at 3×10 with a 2-second pause.

  3. 3

    Inverted row

    Bar at hip height, heels on the floor, body straight, chest to the bar. Start at 3×8-10, raising the bar until 3×8 is possible. Each time 3×10-12 are clean, lower the bar a notch or raise the feet, until the body is horizontal. Move up when 3×10 stay clean with the body horizontal and a 1-second pause at the bar.

  4. 4

    Assisted pull-up

    Use a band or an assisted machine with the lightest assistance that still gives full range, from a dead hang to the chin over the bar. Start at 3×5. Move to lighter assistance, the next band or one machine step, when 3×6 are clean at RPE 8 or less.

  5. 5

    Slow lowering from the top

    Step or jump up until the chin is over the bar, then lower for 3-5 seconds to straight arms. Start at 3×2-3 with a 3-second lowering and add a second each week. Move up when 3×3 at 5 seconds stay clean. Limit it to one or two sessions a week: lowering work leaves the back and elbows sore, so use the soreness screen before the next session.

  6. 6

    Chin-up

    Palms toward you, hands shoulder-width apart. This is usually the first strict rep, because the biceps help more. Start with assisted chin-ups at 3×3-5, or 4-5 single attempts from a dead hang with 2-3 minutes of rest. The first strict chin-up is the milestone. Move up when 3×3 strict chin-ups are clean.

  7. 7

    Strict pull-up

    Overhand grip, hands just outside the shoulders, a start from a dead hang with straight arms, chin over the bar, no kick or swing, and a controlled lowering. Start with 5 sets of 1-2 reps, resting 2-3 minutes, and end a set when a rep slows or needs a swing. Add a rep per set whenever every set is clean. Move up when 3×8 are clean at RPE 8 or less.

  8. 8

    Weighted pull-up

    Add load only once 3×8 strict pull-ups are clean at RPE 8 or less. Start with 2.5-5 kg on a belt or vest for 3×5. Add 2.5 kg when every set reaches 5 at RPE 8 or less.

Run two or three rungs in one week: the main rung from the table above, a row at a harder angle, and a hang or scapular pull as the warm-up. Two pulling sessions a week fit the Upper A and Upper B days of the 4-day upper lower split, where the pull-up (assisted if needed) sits on Upper B. For the other pulls in the week, see lat pulldown alternatives and barbell row alternatives.

A six-week example for a client with 12 rows and no pull-ups

Take a client who manages 12 inverted rows with the bar at hip height, hangs for 30 seconds, and has never done a pull-up. They train pulling twice a week, and every session opens with 2×20 seconds of active hangs. The placement table puts them at the assisted pull-up, with rows at a steeper angle on the same day.

Six weeks from 12 hip-height rows and no pull-ups, with the work and the check for each week.
WeekPull-up workRowsCheck before the next week
Week 1Assisted pull-ups, 3×5, with the lightest band that gives full range3×8, bar one notch lower than the 12-rep heightAll 15 reps clean
Week 2Same band, 3×63×10 at the same angle3×6 clean at RPE 8 or less
Week 3One band step lighter, 3×5. Add slow lowerings, 2×3 at 3 seconds3×8, bar another notch lowerAll reps clean, no elbow pain
Week 4Same band, 3×6. Slow lowerings 3×3 at 4 seconds3×10 at the same angle3×6 clean and every lowering controlled
Week 5Another band step lighter, 3×4. Slow lowerings 3×3 at 5 seconds3×8 with the body horizontalAll three 5-second lowerings reach straight arms under control
Week 6Assisted chin-ups with the week 5 band, 3×3. Then one test single: a strict chin-up from a dead hang3×10 with the body horizontalThe test rep is strict: no swing, chin over the bar
Six weeks from 12 hip-height rows and no pull-ups, with the work and the check for each week.

If a week misses its check, repeat it before changing the band or the lowering time. A strict chin-up at the week 6 test starts the next block at chin-up sets, with assisted pull-ups added for the grip change. No strict rep means repeating weeks 5 and 6 once before testing again. The test is a decision point and promises no date: clients with more body weight to lift usually need more weeks.

When the progression stalls

Most stalls show up as one of four patterns. Match the pattern, make one change, and hold it for two sessions before you add another.

Common pull-up stalls and the one change to try first.
What you seeLikely limitChange to try
The rep sticks about halfway upStrength in the middle of the rangeA 2-second pause at the sticking point on assisted reps, plus 3 holds of 10 seconds there
The shoulders shrug up as the set gets hardShoulder controlStop sets two reps earlier and put scapular pulls back into the warm-up
Grip gives out before the back doesGrip endurance2×30 seconds of dead hangs after the main work, and a heavy carry for 2×20-30 m
The body swings or kicks to finish repsMomentum covering a weak rangeEnd the set at the first swing and add a 3-second lowering to the next reps
Common pull-up stalls and the one change to try first.

When elbows or shoulders object

In the 3-5 band, the ladder already holds the first changes: more assistance, a shorter hang, a neutral grip if the bar has one, or two fewer reps per set. Rows may stay at 0-2/10 on a day when hanging does not, so check them against the same bands. A shoulder that objects to hanging may object to pressing too, and the guide to bench press alternatives for shoulder pain covers that side of the week.

In RaiNGE, a shoulder flag on the client profile keeps hanging work, overhead pressing, bench and chest press variations, push-ups, and dips out of the AI draft, and cautions are shown to the coach. The coach decides if and when hangs and pull-ups come back.

Common questions

How long does it take to get a first pull-up?

There is no reliable timeline. It depends on body weight, starting strength, and how often the client trains pulling. Plan test dates, because outcome dates are guesses: test every 4-6 weeks, and when a test fails, repeat the last block once rather than skipping rungs.

Are chin-ups easier than pull-ups?

For most clients, yes. The palms-toward-you grip lets the biceps help more, so most people can pull more weight that way, which is why the ladder puts the chin-up first. If the chin-up grip bothers the elbows, try neutral handles if the bar has them, and take the pain report.

Are band-assisted pull-ups a good way to progress?

They work if the band gives full range from a dead hang. A band helps most at the bottom, where it is stretched, and least at the top, so the last few inches stay hard. Pair bands with slow lowerings, which train the top. An assisted machine gives steadier help through the range.

Next step

See where the pull-up (assisted if needed) sits on Upper B, and how the rest of the week is built around it.