Skip to content

RaiNGE software

Team workout programming software for squads with mixed readiness and injury levels

A squad shares a block but not a week. This page covers the calls a coach makes per athlete, what RaiNGE adds to them, and the scheduling and planning work it leaves to other tools.

By RaiNGE product teamUpdated

Written for strength coaches and academy staff who program for squads with athletes at different readiness and injury levels.

Short answer

RaiNGE is team workout programming software for the individual calls inside a squad block. It drafts each athlete's program from their own context, removes exercises that conflict with flagged limitations, creates a pending adjustment when a check-in crosses a threshold, and holds every draft for coach approval. It does not claim squad-wide assignment or scheduling, annual planners, or weight-room displays.

  • A squad shares a block, and each athlete arrives with a different week: healthy, flagged, and low-readiness athletes need different calls.
  • Budget review time by kind of athlete: in the example below, 6 off-plan athletes out of 30 take about 38% of the review minutes.
  • RaiNGE adds individual drafts, rule-based removal of conflicting exercises, readiness adjustments, and coach approval.
  • Squad scheduling, annual planning, weight-room displays, and device integrations are outside what RaiNGE claims.

RaiNGE is in private beta for facilities and coaching teams. Apply to try it with one group of athletes and your own staff, and check the scope above against your must-haves.

On this pageThe three kinds of athlete on every squad

The three kinds of athlete on every squad

In any given week, each athlete in a 30-person block is usually in one of three situations. The block's intent stays the same, and the call on the day changes. The basketball off-season program is one full example of such a block.

The three kinds of athlete on a squad: what the coach does, and what RaiNGE adds.
Kind of athleteWhat the coach doesWhat RaiNGE adds
Healthy and on planChecks the draft against the phase of the block and the week's practice load, then approvesDrafts the program from the athlete's goals, training history, equipment, schedule, injury and pain notes, and readiness check-ins. Each exercise is matched to the canonical exercise library and carries a coaching note. The draft waits for your approval
Flagged limitationDecides what replaces the removed work, then checks the session still trains the block's intentSafety rules remove exercises that conflict with the flag, and cautions are shown. When you ask for a swap, it suggests a few alternatives, drops any that conflict with the flag, and lists cautioned options last. Full-program drafts for athletes with injury notes always get a second AI review pass
Low readiness this weekApplies the readiness bands below to that sessionA check-in with readiness under 60%, pain of 4/10 or more, fatigue of 8/10 or more, or sleep quality of 4/10 or less creates a pending adjustment. It shows the trigger, the check-in data, the reasoning, and the proposed before-and-after values. Nothing changes until you approve it
The three kinds of athlete on a squad: what the coach does, and what RaiNGE adds.

The readiness bands the coach applies, in order. The low-readiness guide shows each one on a real session.

  • Readiness 70% or more. Train as planned.
  • Readiness 60-69%. Trim: drop a set or cut load 5-10%.
  • Readiness under 60%. Cut: drop a set, cap effort at RPE 7, and lengthen rest.

What breaks when 30 athletes share one block

A squad sheet handles the shared part well: the lifts, the loads, the calendar. It strains at the edges, which is where athletes differ.

  • The athlete who cannot squat this month. The replacement can live in a text to one coach, and whoever covers the group programs the original again.
  • The athlete back from an away trip. A coach cuts a set at the rack, and the sheet still shows four.
  • The covered week. A second coach edits a copy, and nobody can say which version the athletes trained.

These leaks cost most when several coaches share a group. The strength and conditioning software page covers keeping one standard across a staff.

What RaiNGE covers for a squad today, and what it does not

Squad programming needs, whether RaiNGE claims them today, and what that means for you.
Squad needRaiNGE todayWhat it means for you
A draft for each athleteClaimedEach draft starts from that athlete's own context and waits for a coach's approval
Flag-aware exercise selectionClaimedSafety rules remove conflicting exercises, and cautions are shown to the coach
Readiness-driven adjustmentsClaimedPending adjustments the coach approves or declines
Several coaches on one rosterClaimedMultiple coaches under one organization with role-based access
Assigning one program to the whole squad at onceNot claimedPlan on a draft and an approval for each athlete
Squad-wide schedulingNot claimedKeep your calendar or scheduling tool
Annual planners and season periodizationNot claimedUse a team platform or your own planner
Weight-room tablet displaysNot claimedUse a team platform or a whiteboard
Velocity or force-plate integrationsNot claimedKeep your monitoring platform, and expect to carry results over by hand
Payments and reportsNot claimedKeep your billing and reporting tools
Squad programming needs, whether RaiNGE claims them today, and what that means for you.

A team that needs the not-claimed rows today should check the TeamBuildr and TrainHeroic comparisons and the strength and conditioning software page. RaiNGE can sit beside a team platform for the individual calls, but it claims no integration with one, so athletes are entered in both places.

Worked example: reviewing a squad of 30 with 6 athletes off plan

In this example, a 30-athlete squad holds its Monday programming review. Twenty-four athletes are healthy and on plan, four have a flagged limitation, and two sent low-readiness check-ins. The review minutes below are assumptions for the arithmetic, so replace them with your own.

RaiNGE roster view of a demo coach account showing 12 active clients, 5 needing attention, and a program, readiness percentage, and status label on each row
A demo roster with no customer data. Each row pairs a client with a program, a readiness percentage, and a status label, and the Attention filter counts 5 of the 12 clients. One row reads Low readiness at 42%, below the 60% readiness threshold.
Review time by kind of athlete, using assumed minutes.
Kind of athleteAthletesMinutes eachMinutes total
Healthy and on plan24496
Flagged limitation41248
Low readiness this week2612
Whole squad305.2 on average156
Review time by kind of athlete, using assumed minutes.

The 6 off-plan athletes (4 flagged, 2 low readiness) are 20% of the squad and take 60 of the 156 minutes, about 38%. That is the planning rule: budget review time by kind of athlete, not by head count. With a head coach and two assistants, split it by who knows the athlete. The head coach takes the 4 flagged athletes (48 minutes), one assistant takes 12 healthy athletes (48 minutes), and the other takes 12 healthy athletes and the 2 low-readiness check-ins (60 minutes).

RaiNGE runs multiple coaches under one organization with role-based access, so decide who reviews which group before you start. On Wednesday one athlete reports pain 5/10, which creates a pending adjustment. The coach uses the 3-5/10 band from the pain score guide: reduce load or range first, then adjust the setup, then change the exercise. At 8 minutes to review it, the week comes to 164 minutes, and that report touches no other athlete's plan.

When another tool should come first

  • Teams whose main job is scheduling and planning. If you need squad-wide calendars, an annual planner, or weight-room tablet displays today, start with a team platform and its comparison page.
  • Departments that need monitoring data inside the program. RaiNGE claims no velocity or force-plate integrations.
  • Staff who want the block to change itself. Nothing changes an assigned plan until a coach approves it.
  • Return-to-play and medical decisions. Those stay with your medical staff. RaiNGE does not diagnose, treat, or route to clinicians.

Common questions

How do you program a squad when athletes have different injuries?

Write one block with a fixed session shape: warm-up, main lift, accessory work, finisher. Then vary the exercise inside each slot per athlete, so the room runs on one schedule while a flagged athlete trains a different squat pattern. Review the flagged athletes first, because a wrong substitution costs the most there.

Does RaiNGE plan the whole season?

RaiNGE does not claim annual planners or season-long periodization tools. It drafts each athlete's program from their context, and a coach approves it. For annual planning, TeamBuildr's pricing page (opens in a new tab), checked November 6, 2026, describes an Annual Planner on its top tier.

Can I use RaiNGE next to a team platform I already have?

For the individual calls, yes, at a cost. RaiNGE claims no integration with team platforms, so athletes are entered in both places. Start with the flagged athletes, where individual drafts matter most, and count the double entry in your review minutes.

Next step

RaiNGE is in private beta for facilities and coaching teams. Apply to try it with one group of athletes and your own staff, and check the scope above against your must-haves.

Apply for the beta

Apply with your roster size and your biggest programming bottleneck. We review fit and talk through how you program before any account is set up.