Program template
A 12-week hypertrophy program for four days a week, with the weekly sets for every muscle
Most 12-week plans stop at the exercise list. This one adds the hard sets for every muscle in every week, the rule for when not to add a set, and a short version of each session that cuts exercises and keeps every remaining set hard.
By RaiNGE product teamUpdated 11 min read
Written for coaches building a 12-week muscle-gain block for clients who train four days a week.
Jump to the weekly templateAnswer a short intake and RaiNGE emails you one workout as a PDF, with sets, reps, and effort targets to set beside this program's sessions. Get a free sample workout
On this pageWho this program fits, and who should start elsewhere
Who this program fits, and who should start elsewhere
This block suits intermediate clients who want muscle size, can train four days a week for 60-75 minutes, and have a full gym. For a strength-first four-day block, use the 4-day upper lower split.
The four-day week and the 12-week set ladder
Train Monday, Tuesday, Thursday, and Friday, or any layout without four days in a row. Each muscle trains once on an A day and once on a B day, with different lifts. Upper days grow from 19 to 26 sets by week 11, and Lower days from 13 to 18.
Count hard sets. A hard set ends at RPE 7 or higher, with 3 or fewer reps in reserve, and warm-ups and easier sets do not count. Each set counts toward the muscle the lift is chosen for, so the triceps work in a bench press goes uncounted. The four large muscles (chest, back, quads, hamstrings and glutes) start near 10 sets. The four smaller ones start at 6 direct sets, because shoulders, biceps, and triceps also work in every press and row, and the calves share the start so the ladder stays one shape. These are starting points: how to choose a training split gives the same rule of about 10 for large muscles and fewer for arms, shoulders, and calves.
Phase 1 and Phase 2: the exercises, doses, and rules
Keep the same exercises for all 12 weeks so the log compares week to week. Find the week 1 loads in the first session by stopping each compound set with 3 reps in reserve and each machine or isolation set with 2. Brackets show the set count from the week named, and a set goes in only if the muscle passed last week's checks.
Phase 1, weeks 1-5: build the base
Doses shown are for weeks 1-2. Sets rise in weeks 3 and 5 where marked. Compound lifts at RPE 7, then RPE 8 from week 3, resting 2-3 minutes. Machine, cable, and isolation lifts at RPE 8, resting 60-90 seconds, with the last set of each at RPE 9.
Monday
Upper A
Chest and back first
- Barbell bench press
- 3×6-10
- Barbell row
- 3×6-10
- Incline dumbbell press
- 2×8-12 (3 from week 3)
- Lat pulldown
- 2×10-15 (3 from week 3)
- Lateral raise
- 3×12-15 (4 from week 5)
- Cable curl
- 3×10-15 (4 from week 5)
- Triceps pressdown
- 3×10-15 (4 from week 5)
Tuesday
Lower A
Squat and hinge first
- Barbell back squat
- 3×6-10
- Romanian deadlift
- 3×6-10
- Leg press
- 2×10-15 (3 from week 3)
- Lying leg curl
- 2×10-15 (3 from week 3)
- Standing calf raise
- 3×10-15 (4 from week 5)
Thursday
Upper B
Dumbbell presses and rows first
- Dumbbell shoulder press
- 3×8-12
- Chest-supported dumbbell row
- 3×8-12
- Dumbbell bench press
- 3×8-12
- Seated cable row
- 2×10-15 (3 from week 5)
- Cable fly
- 2×10-15 (3 from week 5)
- Incline dumbbell curl
- 3×10-15
- Overhead triceps extension
- 3×10-15
Friday
Lower B
Front squat first, at about 75-80% of the back squat load
- Barbell front squat
- 3×6-10
- Barbell hip thrust
- 3×6-10
- Leg extension
- 2×10-15 (3 from week 5)
- Seated leg curl
- 2×10-15 (3 from week 5)
- Seated calf raise
- 3×10-15
When to adjust
- Every set at the top of the range at or below its target RPE
- Add the smallest load jump next session
- A set is due and the muscle failed a check
- Hold that muscle's sets for a week
- Pain 0-2/10 and familiar
- Continue and monitor
- Pain 3-5/10
- Reduce load or range first, then adjust the setup, then change the exercise
- Pain 6-7/10
- Stop the movement that provokes it and choose a conservative alternative
- Pain above 7/10, or sharp, worsening, radiating, or unfamiliar pain
- Stop loading and refer to a qualified professional
- Readiness 70% or more
- Train as planned
- Readiness 60-69%
- Trim: drop a set or cut load 5-10%
- Readiness under 60%
- Cut: drop a set, cap effort at RPE 7, and lengthen rest
Phase 2, weeks 7-11: push the volume
Doses shown are for weeks 7-8, the same as week 5. A muscle that held starts at the sets it last completed. Sets rise in weeks 9 and 11 where marked. Compound lifts at RPE 8, machine, cable, and isolation lifts at RPE 8-9, and the last set of each at RPE 9-10. Rest, readiness, and pain rules are as in Phase 1.
Monday
Upper A
As week 5
- Barbell bench press
- 3×6-10
- Barbell row
- 3×6-10
- Incline dumbbell press
- 3×8-12 (4 from week 9)
- Lat pulldown
- 3×10-15 (4 from week 9)
- Lateral raise
- 4×12-15
- Cable curl
- 4×10-15
- Triceps pressdown
- 4×10-15
Tuesday
Lower A
As week 5
- Barbell back squat
- 3×6-10
- Romanian deadlift
- 3×6-10
- Leg press
- 3×10-15 (4 from week 9)
- Lying leg curl
- 3×10-15 (4 from week 9)
- Standing calf raise
- 4×10-15
Thursday
Upper B
As week 5
- Dumbbell shoulder press
- 3×8-12 (4 from week 11)
- Chest-supported dumbbell row
- 3×8-12
- Dumbbell bench press
- 3×8-12
- Seated cable row
- 3×10-15 (4 from week 11)
- Cable fly
- 3×10-15 (4 from week 11)
- Incline dumbbell curl
- 3×10-15 (4 from week 11)
- Overhead triceps extension
- 3×10-15 (4 from week 11)
Friday
Lower B
As week 5
- Barbell front squat
- 3×6-10
- Barbell hip thrust
- 3×6-10
- Leg extension
- 3×10-15 (4 from week 11)
- Seated leg curl
- 3×10-15 (4 from week 11)
- Seated calf raise
- 3×10-15 (4 from week 11)
When to adjust
- Every set at the top of the range at or below its target RPE
- Add the smallest load jump next session
- Two warning signs in one week, or one for two weeks
- Call the deload early
How to progress: rep ranges, effort, and when not to add a set
Progress with double progression: hold the load until every set reaches the top of the range, then take the smallest jump and restart near the bottom.
The double progression guide starts barbell compounds at 5-8, a starting point for strength work. This block runs them at 6-10, a deliberate difference: sets of 5 tend to cost more recovery per hard set, and a rising set count already spends recovery. The range is still 4 reps wide, inside the guide's 3-5. The load test is the guide's, except that the last set of a machine, cable, or isolation lift is meant to be hard. Barbell and dumbbell compounds keep at least 1 rep in reserve, and machine sets go to failure only with safeties set. Ratings follow the RPE scale guide.
When not to add a set
Check each muscle at the end of the week, before the planned add. One failed check holds that muscle's sets for a week. The same check failing a second week, or two checks failing in one week, is the deload week rule: call the deload early and resume at the sets from before the signs. Hold the sets too if a session runs past 75 minutes.
Example, not client data: week 3 adds a set to the incline press, so chest goes from 10 to 11. In week 4 the bench press, 70 kg (154 lb) for 3×6-10, falls from 9, 8, 8 to 8, 7, 6 at RPE 9. With readiness at 70% or more and normal soreness, that is a single sign, so week 5 holds chest at 11 while the other muscles add their set.
In RaiNGE, a draft starts from the client's goals, training history, equipment, schedule, and injury and pain notes, and the coach reviews, edits, and approves it before it reaches the client. A readiness check-in under 60% creates a pending adjustment for the coach, and nothing changes the plan until the coach approves.
Swap equipment, work around a flagged joint, and shorten a session
Swap by the slot's job and keep the sets. A new lift finds its load the same way as in week 1.
How to judge progress without promising an outcome
Gains vary by client, so judge each against their own baseline at fixed checkpoints, taking every measure under the same conditions.
If strength is flat or falling for two checkpoints, treat it as a recovery signal and run the deload checks before adding a set.
Common questions
What comes after week 12 of a hypertrophy block?
Take the week 12 deload, then start the next block at the week 5 sets with the loads you left, and rotate the accessories. If the ladder stalled for several weeks, repeat this block from its week 1 sets first.
What if a client misses a session during the block?
Skip it, and do not stack its sets onto the next day: a longer session lowers the effort on every set. A missed Upper A leaves chest and back with one session, so hold their sets next week. Two missed sessions in a week: repeat the week.
How do you bring up one lagging muscle on this program?
Add 2 sets to that muscle's machine or isolation lifts from week 1, and keep the sessions under 75 minutes by trimming a set or two from a muscle that is already well served. Change one muscle at a time and judge it at the week 6 checkpoint.