Skip to content

Program template

A 2 day a week workout program: two full-body sessions, progression rules, and a one-day fallback

Two days a week can train every movement pattern twice if each session covers all of them. This template gives sessions A and B, the weekly set counts, and the plan for the week that only has one day.

By RaiNGE product teamUpdated 11 min read

Written for coaches programming for clients who can reliably train only two days a week.

Jump to the weekly template

Short answer

A 2 day a week workout program runs two full-body sessions, A and B, at least 48-72 hours apart. Each session trains a squat or lunge, a hinge, a horizontal push and pull, a vertical press or pull, and a trunk or carry, so every pattern lands twice a week. Progress by double progression, and keep a one-day fallback.

  • Run sessions A and B at least 48-72 hours apart, six exercises each, so every pattern lands twice a week at about 6 hard sets (a starting range of 4-8).
  • Progress each lift with double progression: barbell compounds 5-8 reps, dumbbell compounds 8-12, machines and isolation 10-15.
  • When only one day happens, run the one-day fallback: three or four main exercises, never A and B squeezed into one visit.
  • Add a third day only after four weeks of full attendance, steady recovery, and a goal that needs more frequency.

Answer a short intake and get one free sample workout as a PDF, so you can compare its sets, reps, and rest with this template. Get a free sample workout

On this pageWho two days fits, and who needs more

Who two days fits, and who needs more

It suits clients whose week reliably holds two sessions of 45-60 minutes in a gym or a basic home setup: beginners, busy intermediates, and experienced clients maintaining what they have. Reliable matters more than ideal, because two sessions a client keeps beat four they miss. A beginner can also use the 12-week beginner strength program, which rotates its A, B, and C sessions in order when only two days are reliable.

Run the program when the client passes every check.
CheckRun it whenChoose something else when
ScheduleTwo sessions of 45-60 minutes hold up most weeks, with at least one rest day between themThree or more days are reliable most weeks: use the 3-day full body program
ExperienceBeginner, busy intermediate, or experienced and maintainingThe goal asks for more weekly volume or practice than two days hold
GoalGeneral strength, size, and fitness, or keeping heavy lifts practicedA powerlifting meet, a sport season, or another goal that needs more frequency
EquipmentBarbell, rack, bench, dumbbells, and a cable stack, or a home setup with dumbbells, a bench, and a pull-up bar or bands using the swaps belowDumbbells only and no bench: use the dumbbell only workout program
Pain statusAny pain in training is 0-2/10 and familiarAn active pain flag: apply the substitution rules and the pain bands below first, then start
Run the program when the client passes every check.

The week: sessions A and B

Session A leads with the back squat and the bench press, and session B leads with the trap bar deadlift and a shoulder press. Each holds one exercise from every pattern, so nothing waits for next week. Put them on non-consecutive days, such as Monday and Thursday, at least 48-72 hours apart.

Rest 2-3 minutes after the first two lifts and 60-90 seconds after the rest. Alternate exercises 3 and 4, then 5 and 6, to hold each session near 50-60 minutes with a 5-minute warm-up.

Weekly hard sets per movement pattern. A hard set is a working set at RPE 7 or higher, warm-ups excluded.
PatternSession ASession BWeekly hard sets
Squat or lungeBarbell back squat 3×5-8Dumbbell reverse lunge 3×8-12/side6
HingeDumbbell Romanian deadlift 3×8-12Trap bar deadlift 3×5-86
Horizontal pushBarbell bench press 3×5-8Dumbbell bench press 3×8-126
Horizontal pullChest-supported dumbbell row 3×8-12One-arm dumbbell row 3×8-12/side6
Vertical press or pullLat pulldown 3×10-15Seated dumbbell shoulder press 3×8-126
Trunk or carryPallof press 2×10-12/sideFarmer carry 3×30-40 s5
Weekly hard sets per movement pattern. A hard set is a working set at RPE 7 or higher, warm-ups excluded.

About 6 hard sets per pattern per week is a conventional starting point, with a range of 4-8. Use 4 for a new client or a heavy week, and 8 only for a client who recovers well and wants more. Add volume as a set on an existing exercise, not as a seventh exercise. The sets per muscle group per week guide explains how to count them.

2 day a week program, one week

Six exercises per session, about 50-60 minutes. For the first two weeks, start every lift at RPE 6-7 so the loads are found, not guessed. After that, work the main lifts at RPE 8. When attendance stays uneven after that, see [how to progress a client who keeps missing sessions](/workout-programs/progress-a-client-who-keeps-missing-sessions).

Monday

Session A

Squat and bench press first

Barbell back squat
3×5-8
Barbell bench press
3×5-8
Chest-supported dumbbell row
3×8-12
Dumbbell Romanian deadlift
3×8-12
Lat pulldown
3×10-15
Pallof press
2×10-12/side

Thursday

Session B

Trap bar deadlift and shoulder press first

Trap bar deadlift
3×5-8
Seated dumbbell shoulder press
3×8-12
Dumbbell reverse lunge
3×8-12/side
Dumbbell bench press
3×8-12
One-arm dumbbell row
3×8-12/side
Farmer carry
3×30-40 s

When to adjust

Every set at the top of the range, at or under the lift's RPE
Add 2.5 kg (5 lb) to barbell lifts, including the trap bar deadlift, or move to the next dumbbell pair
Readiness 70% or more
Train as planned
Readiness 60-69%
Trim: drop a set or cut load 5-10%
Readiness under 60%
Cut: drop a set, cap effort at RPE 7, and lengthen rest
Pain 0-2/10 and familiar
Continue and monitor
Pain 3-5/10
Reduce load or range first, then adjust the setup, then change the exercise
Pain 6-7/10
Stop the movement that provokes it and choose a conservative alternative
Pain above 7/10, or sharp, worsening, radiating, or unfamiliar pain
Stop loading and refer to a qualified professional
Only one day possible this week
Run the one-day fallback below

The pain scale guide explains each pain band, and adjusting a workout for low readiness covers what to ask before the first set.

Progression, and when two days a week needs a deload

Run every lift on double progression: hold the load until every set reaches the top of the range at the lift's RPE, then take the smallest jump and restart near the bottom. With two exposures a week, a load change every 2-4 weeks is normal.

Rep ranges, load jumps, and an example for each exercise type. The examples are illustrations, not client data.
Exercise typeRep rangeAdd load whenExample
Barbell compound5-8Every set reaches 8 at RPE 8 or less. Add 2.5 kg (5 lb), the smallest barbell jump, trap bar deadlift includedBack squat 3×5-8 at 80 kg (176 lb): 8, 8, 8 at RPE 8, so next week is 82.5 kg (182 lb) for 3×5-6
Dumbbell compound8-12Every set reaches 12 at RPE 8 or less. Take the next dumbbell pairDumbbell bench press 3×8-12 at 24 kg (53 lb) per hand: 12, 12, 12, so the next session uses 26 kg (57 lb) for 3×8-9
Machine or isolation10-15Every set reaches 15. Move the pin one slotLat pulldown 3×10-15 at 50 kg (110 lb): 15, 15, 15, so the next session uses 55 kg (121 lb) for 3×10-11
Carry or timed work30-40 sEvery set reaches 40 s. Add load and restart at 30 sFarmer carry 3×30-40 s at 20 kg (44 lb) per hand: 40, 40, 40, so the next session uses 22 kg (49 lb) for 30 s
Rep ranges, load jumps, and an example for each exercise type. The examples are illustrations, not client data.

Deloads at two days a week

The deload week guide schedules intermediate clients after about 4-6 weeks of adding load, and lower-volume plans such as three full-body days can run 6-8 weeks. Two days a week is lower volume again, so many clients need fewer planned deloads. Decide from the log, not the calendar.

When to deload on a 2 day a week program, decided from the log.
What the log showsDecisionWhat to run
Loads still rising every 2-4 weeks, RPE on target, readiness 70% or moreNo deload. After 6-8 weeks of adding load, a lighter week is optionalA and B as written, or a lighter week: 3 sets become 2 with the same loads, a third fewer because this plan starts at low volume
One lift stalls for two sessionsNot a deload. Cut that lift's load 10% and build backThe other lifts keep progressing
Two warning signs in one week: the same load feels 1 RPE harder, reps fall short, readiness under 60% on several check-ins, or soreness rising two weeks in a rowDeload the next weekCut sets 40-50% and keep the load, or cut load 10-20%, as in the deload guide
A break of two weeks or moreA restart, not a deloadUse the restart guide to set loads and sets
When to deload on a 2 day a week program, decided from the log.

When only one day happens: the fallback and the missed-week rules

Decide the rule before week one, so a missed Thursday never becomes a debate. Rotate by session, not by date: if the last session run was A, the next one is B, whichever day it falls on. A one-day week gets the fallback below, never A and B squeezed into one visit.

The one-day fallback: the main exercises only, 3-4 exercises, about 40-50 minutes.
SlotExercise and doseAlternate with, on the next one-day week
Lower bodyBarbell back squat 3×5-8Trap bar deadlift 3×5-8
PushBarbell bench press 3×5-8Seated dumbbell shoulder press 3×8-12
PullChest-supported dumbbell row 3×8-12Lat pulldown 3×10-15
Carry (optional fourth exercise)Farmer carry 2×30-40 sPallof press 2×10-12/side
The one-day fallback: the main exercises only, 3-4 exercises, about 40-50 minutes.

Alternating the choices means every main lift is trained at least every second week. A lift that was trained progresses as usual if every set reached the top of the range, and a lift that was not trained repeats its last load.

Missed-week rules for the rotation.
What happenedWhat to runProgression
Both days happenA and B as writtenNormal double progression
One day happensThe one-day fallbackTrained lifts progress as normal. The rest repeat last load
No sessions in a weekThe next session in the rotation. Do not double up the following weekCut all loads 10%, as the deload guide does for about a week away, then resume the ladder
Two weeks or more without a sessionA restart: use the restart guideLoads come from the layoff table, not the log
The two sessions fall on consecutive daysA then B in order, with the second capped at RPE 7Progress as normal if every set reached the top of the range at RPE 7 or lower
Missed-week rules for the rotation.

What two days cover, and when to add a third

Two sessions cover less than four do, and the client should hear that before week one. Use the table to set expectations without promising an outcome.

What two days a week cover for strength, size, and fitness, and what to add if it matters.
GoalWhat two days coverWhat they leave outWhat to add if it matters
StrengthEach main lift practiced twice a week, with heavy sets of 5-8Peaking for a max or a meet, which needs more frequent practice of the competition liftsA third day, then a program written for the meet
SizeEvery pattern trained twice a week at about 6 hard setsWeekly volume above the 4-8 range for any one patternAn extra set on the target pattern within the range, then a third day
FitnessA little conditioning from carries and alternated exercisesRegular cardio, which two sessions do not provideEasy walking or cycling on non-lifting days, as the client's time allows
Maintenance for an experienced clientHeavy lifts kept practiced at working loads, with 2-3 sets eachNew progress goals that need more weekly setsA third day when the goal changes
What two days a week cover for strength, size, and fitness, and what to add if it matters.

When to add a third day

Add a day because the log says the client is ready, not because the week has a gap.

Three checks before adding a third day.
CheckAdd the day whenWait when
AdherenceBoth sessions happened in each of the last four weeks (8 of 8)Any session was missed. Fix attendance first, because a third day the client misses is worse than two they keep
RecoveryReadiness 70% or more at most check-ins, RPE on target, and no two warning signs in a weekReadiness is under 70% on several check-ins, or a deload is due
Goal and timeThe goal needs more frequency or volume than the table above covers, and the client can give another 45 minutesTwo days already serve the goal, or the extra day would cost sleep or family time
Three checks before adding a third day.

When all three say yes, add the third day as an easy session first: the lighter exercises from A or B at RPE 6-7 for 40-45 minutes. After four steady weeks, move the client to the 3-day full body program, which rotates heavy, light, and medium days.

Substitutions that keep each slot's job

Swap by pattern and keep the rep range of the lift you replace. The squat alternatives guide covers Session A's squat, and the dumbbell only workout program covers a home setup with no barbell.

Substitutions for each slot, with what to choose by.
Original liftSwap optionsChoose by
Barbell back squatGoblet squat, front squat, leg pressKnee and back tolerance, and which option takes 5-8 reps under control. Start a front squat at about 75-80% of the back squat load
Trap bar deadliftDumbbell Romanian deadlift, cable pull-through, hip thrustHow much hinging the low back tolerates after Session A. The low back pain deadlift alternatives guide covers the options
Barbell bench pressDumbbell bench press, machine chest press, push-upShoulder tolerance, and whether a spotter is available. See bench press alternatives for shoulder pain
Seated dumbbell shoulder pressLandmine press, half-kneeling one-arm pressComfort overhead. The overhead press alternatives guide lists more
Lat pulldownAssisted pull-up, one-arm cable pulldownThe option the client controls through a full range. See lat pulldown alternatives
Dumbbell reverse lungeSplit squat, step-up, leg pressBalance and knee comfort, with effort kept at RPE 7-8
Substitutions for each slot, with what to choose by.

In RaiNGE, a draft starts from the client's context, including goals, training history, equipment, and schedule, and a coach reviews, edits, and approves it before it reaches the client.

Common questions

Should a 2 day a week program be full body or an upper lower split?

Full body, for most clients. An upper lower split trains each region once a week at two days, and one missed session leaves a region untrained for two weeks. Full-body sessions put every pattern in both visits. The guide to choosing a training split covers the exceptions.

Can the two sessions fall on a Saturday and a Sunday?

Yes, when the week allows nothing else. Run A on Saturday and B on Sunday, swap Saturday's Romanian deadlift for a hamstring curl to keep the low back fresh for Sunday's trap bar deadlift, and cap Sunday at RPE 7.

What should a coach cut when a session has to fit in 40 minutes?

Cut in this order: the trunk or carry exercise (6), then one set from each of exercises 3 to 5, then exercise 5 itself if the client is still short on time. Keep the first two lifts of the session at full sets, because they carry the heaviest work.

How should an experienced client use two days to maintain?

Keep the intensity and cut the volume. Run the heavy lifts at their working loads for 2-3 sets of 5-8, drop most accessories, and keep RPE at 7-8. Progress only when the client chooses a new goal.

Next step

Answer a short intake and get one free sample workout as a PDF, so you can compare its sets, reps, and rest with this template.