Skip to content

Guide

How many sets per muscle group per week: a counting method and starting ranges

Most answers give one number. This page gives a counting rule, starting ranges by client type, and a real week counted set by set, so you can check any program against it.

By RaiNGE product teamUpdated 9 min read

Written for coaches setting the weekly volume for a new program.

Short answer

Start a client who has trained for a year or more at 10-16 hard sets per muscle group per week, a new lifter at 6-10, and a returning client at 8-12. A hard set is a working set with 1-3 reps in reserve (RPE 7-9). Train each muscle in at least two sessions.

  • Count only working sets taken to 1-3 reps in reserve. Warm-up sets and easy sets stay out of the count.
  • Pick one counting rule for compound lifts and keep it for the whole block, so weekly totals compare.
  • About 6-8 hard sets for one muscle in one session is a starting ceiling. Move extra sets to another day.
  • Add 1-2 sets to one muscle at a time. Cut 20-30% when reps fall across sets and sessions.

See a set ladder for every muscle across 12 weeks, with the rule for when not to add a set. Read the 12-week program

On this pageWhat counts as a hard set, and the rule for compound lifts

What counts as a hard set, and the rule for compound lifts

A hard set is a working set that ends with 1-3 reps in reserve, which is RPE 7-9 on the RPE scale. Warm-up sets are excluded. The count is a tool for comparing weeks, so it only works if you count the same way every week.

Which sets go into the weekly count.
SetCounts?Why
Working set, 1-3 reps in reserve (RPE 7-9)YesThis is the unit the starting ranges below are written in
Warm-up and ramp setsNoThey prepare for the work and are not the work
Easy working set, RPE 6 or lowerNoFour or more reps in reserve: log it as practice, and count it once effort reaches RPE 7
Set taken to RPE 10YesIt counts as one set, and most sets in a block should stay at RPE 9 or lower
Set stopped early for painNoScore the pain and use the pain bands before counting anything
Which sets go into the weekly count.

Compound lifts work several muscles at once, so you need a rule for them. Rule 1, main mover: each set counts toward the one muscle the lift is chosen for, so a bench press set is a chest set and a row set is a back set. Rule 2, half credit: the main mover gets the full set and a clear secondary mover gets half, so a bench press set is one chest set and half a triceps set.

Pick one and keep it. Switching rules mid-block moves the weekly total with no change in training. Rule 1 is quicker to tally, and the 12-week hypertrophy program counts this way, so its set ladder compares directly. The ranges and the per-session ceiling on this page are rule 1 numbers, and the same week reads higher under rule 2.

Starting ranges by client type

These are hard sets per large muscle group per week, as starting points. Published ranges differ, and coaches argue for lower and higher numbers than these, so treat the table as the place to start and the adjust table below as the way to move. Clients between six and twelve months of lifting start at 8-12. Shoulders, arms, and calves usually start lower than the large muscles, because presses and rows already work them: the training split guide gives about 10 for large muscles and fewer for those three.

Starting hard sets per large muscle group per week, by client type.
ClientHard sets per weekSessions per muscleNotes
New to lifting (under about 6 months)6-102Start at 6. Early sets at RPE 5-6 are practice sets, so count them once effort reaches RPE 7
Returning after a layoff8-122Start below the range and build back with the ramp on restarting training after a layoff. The old number is a ceiling to return to
Trained consistently for a year or more10-162-3Start near 10 and add a set at a time. The top of the range is for clients who recover well from it
Short on time (two sessions a week)6-82Full-body sessions of 3-4 hard sets per muscle. The 2-day a week program runs about 6 hard sets per movement pattern
Starting hard sets per large muscle group per week, by client type.

Whatever the number, train each muscle in at least two sessions. Six sets as 3 and 3 is usually a better shape than one session of 6: each session stays shorter and the muscle gets a second look at the movement.

How to split the weekly number across sessions

Training a muscle two or more times a week keeps each session's share small. A rough ceiling is 6-8 hard sets for one muscle in one session, as a starting point and not a law. Past it, later sets tend to get done tired, so move them to another day instead.

Weekly target, how often to train the muscle, and the sets in each session.
Weekly targetSessionsSets per sessionTypical shape
6-823-4Two full-body days, one or two exercises per muscle
10-1225-6Upper/lower, two or three exercises per muscle
14-163, or 2 at the ceiling4-6 across three, or 7-8 across twoThree full-body days, or an upper/lower week with long sessions
Weekly target, how often to train the muscle, and the sets in each session.

If a client misses a session, do not stack its sets onto the next day. A longer session lowers the effort on every set, and the count only includes hard ones. Hold the muscle's number for the week instead.

Worked tally: count one real week

This tally uses the week from the 4-day upper lower split, as an example and not client data. That template prescribes every working set at RPE 7-8, so every set counts as hard. The split squat is the front-foot elevated split squat, and the rear delt fly counts as shoulders.

One week of the 4-day split, counted under each rule. The count is hard sets per muscle.
MuscleLifts and sets counted under rule 1Rule 1 totalRule 2 total
ChestBench press 4, incline dumbbell press 3, dumbbell bench press 31010
BackBarbell row 4, lat pulldown 3, pull-up 4, chest-supported row 31414
ShouldersOverhead press 4, lateral raise 3, rear delt fly 31015
QuadsBack squat 4, leg press 3, front squat 3, split squat 31315
Hamstrings and glutesRomanian deadlift 4, leg curl 3, trap bar deadlift 4, hip thrust 31420.5
BicepsNone direct07
TricepsNone direct07
CalvesStanding calf raise 333
TrunkPallof press 222
All muscles20 exercises across four sessions6693.5
One week of the 4-day split, counted under each rule. The count is hard sets per muscle.

Rule 2 adds half a set to a secondary mover for each of these: chest presses to the triceps and shoulders, the overhead press to the triceps, rows and pulls to the biceps, squats, leg press, and split squat to the glutes, and the trap bar deadlift to the quads. That is why the arms jump from 0 to 7 and the total rises by 27.5. Neither number is wrong. They answer different questions, which is why you pick one.

Read the week against the starting range for a client who has trained for a year or more, 10-16. Chest and shoulders sit at the bottom under rule 1, back, quads, and hamstrings and glutes at 13-14 are mid-range, and calves at 3 sit under the 6 direct sets the 12-week program starts them at. That suits a strength block built on heavy compounds, and it shows where to look if the goal moves toward size. Under rule 1 the largest single-session count for any muscle is 7, for example chest on Upper A (bench press 4, incline press 3), which is inside the 6-8 ceiling.

Adjust the number from what the log shows

Check each muscle once a week, from the log. Change one muscle at a time, so you can tell which change caused what.

Signs the weekly dose is too low, about right, or too high, and what to do.
ReadingWhat the log showsWhat to do
Too lowEvery set ends with 4 or more reps in reserve, loads and reps rise easily, effort and soreness stay low, and readiness is mostly 70% or moreCheck effort first: if sets sit at RPE 6 or lower, move them to 1-3 reps in reserve before adding any. If effort is already there, add 1-2 sets to one muscle for two to three weeks, then check again
About rightReps or load rise most weeks at RPE 7-9, the muscle is recovered by its next session, and pain is 0-2/10 and familiarHold the number and change nothing else
Too highReps fall across sets and across sessions at the same load, readiness trends down, soreness lasts into the next session, or a joint complainsCut that muscle's sets 20-30% (14 sets becomes 10-11). If two or more muscles show it in one week, consider a deload week. If a joint complains at 3/10 or more, apply the pain bands first
Signs the weekly dose is too low, about right, or too high, and what to do.

Example: hamstrings and glutes sit at 14 sets. For two weeks the Romanian deadlift at 70 kg (154 lb) falls from 8, 8, 7, 7 reps to 7, 6, 6, 5 at the same load, and readiness has been under 70% most days. Cut the muscle to 10 sets, which is a 29% cut, and leave the other muscles alone. When reps recover for two weeks, climb back one set at a time.

In RaiNGE, a coach reviews, edits, and approves every program before it reaches the client, so the set counts above are yours to set and change.

When volume is the wrong lever

Sets are one dial among several. When the problem sits somewhere else, changing the weekly number only hides it.

Four situations where adding or cutting sets will not fix the problem, and what to check first.
SituationWhy sets will not fix itDo this first
Pain on a liftFewer sets leave the cause in place, and more sets load it againScore the pain and apply the pain bands, then decide what the lift becomes
Poor sleep or a heavy stretch outside trainingThe same sets cost more when recovery is short, and a weekly number cannot see thatUse the readiness bands for the week. What the client does about sleep is the coach's call or a referral, and sits outside this page
Effort that is not loggedThe count assumes every set is hard. If half the sets end at RPE 5-6, the real count is about halfLog RPE on every working set for two weeks, then count again
The wrong exercise for the clientA muscle that never feels worked often points to a lift that does not suit the client's build or setup, and more sets add more of the sameSwap one exercise in that slot before adding a set. A lat pulldown felt only in the arms may do better as a seated cable row
Four situations where adding or cutting sets will not fix the problem, and what to check first.

Common questions

How many sets per week should small muscles like biceps and calves get?

Fewer than the large muscles, because presses and rows already work shoulders and arms. The 12-week hypertrophy program starts shoulders, biceps, triceps, and calves at 6 direct sets and the large muscles near 10. Count them with the same rule you use for compound lifts.

What happens to weekly sets during a deload week?

Cut working sets 40-50% and keep the load, as the deload guide describes, so a muscle at 12 sets runs about 6-7. The count restarts the week after at the sets from before the deload, not at the lower number.

How fast can you add sets to a muscle?

Add 1-2 sets to one muscle at a time and hold them two to three weeks before the next check. The 12-week hypertrophy program adds about a set every second week while recovery holds. Raising every muscle in one week hides which change caused a problem.

Can two sessions a week reach the weekly number?

Up to a point. Two sessions of 3-4 hard sets per muscle give 6-8 a week, which is where the 2-day program sits at about 6 per movement pattern. Reaching 10-12 means 5-6 per session, still under the 6-8 ceiling, but it needs longer sessions, so check session time before adding sets.

Next step

See a set ladder for every muscle across 12 weeks, with the rule for when not to add a set.