Skip to content

Guide

What to do in a first personal training session: a 60-minute run sheet

Most first-session advice is a list of tips. This page is a timed run sheet, with the sets, effort, and stop rules that get a new client to a second session.

By RaiNGE product teamUpdated 10 min read

Written for personal trainers planning a new client's first session.

Short answer

A first personal training session runs about 60 minutes: five to confirm the goal, five for a readiness and pain check, 15 for five simple movement observations, 25 for a light first block, and 10 to close. Use RPE 5-6 and 2-3 sets, and end every set with 4 or more reps in reserve. Do not test a max.

  • Observe, do not diagnose: five movements, written as what you saw, with no scores.
  • Light on purpose: bodyweight or the lightest load that shows the pattern, 2-3 sets, RPE 5-6.
  • Check pain before the first movement and use the bands. A red sign ends loading for the day.
  • Book the second session before the client leaves, and tell them what tomorrow may feel like.

See the three-phase plan that takes a client from the first session through week 12. Start the 12-week beginner program

On this pageThe 60-minute run sheet

The 60-minute run sheet

Keep time. The five blocks add up to 60 minutes. Fill in the client intake form first, so none of the first five minutes goes on paperwork.

Minute-by-minute run sheet for a 60-minute first session.
MinutesWhat you doWhat you are watching forWhat you decide
0-5Welcome. Read the goal back in the client's words, confirm the days they can train, and say what today is: a movement check and a light first workout, not a testNerves, how they talk about their body, and whether the goal on the form is still the goalWhether the goal needs one clarifying question, and whether today's plan stays as written
5-10Readiness and pain check. Ask how ready they feel from 0 to 100%, how they slept, and for any pain from 0 to 10 and whether it is familiar. Re-ask every clearance question that was a yes or blankPain higher than the form said, new, sharp, or after a fall. Dizziness or breathlessness at restWhich band applies, from the table below
10-25Movement screen: five simple observations of squat, hinge, push, pull, and carry or brace, about three minutes each, bodyweight or the lightest loadRange, position, and left against right, noted in words, plus any symptomWhich version of each pattern the client starts with
25-50The first training block: one exercise per pattern, 2-3 sets at RPE 5-6Technique under light load, breathing, and how fast they recover between setsWhether to add a third set, and whether any exercise comes off the card
50-60The close. Say what tomorrow may feel like, separate soreness from pain, book the next session, and give one thing to do in betweenConfidence, questions, anything they held back earlierThe date of session two and which exercises it repeats
Minute-by-minute run sheet for a 60-minute first session.
Pain and readiness bands to read at minute 5-10.
ReportRule
Pain 0-2/10 and familiarContinue and monitor.
Pain 3-5/10Reduce load or range first, then adjust the setup, then change the exercise.
Pain 6-7/10Stop the movement that provokes it and choose a conservative alternative.
Pain above 7/10, or sharp, worsening, radiating, or unfamiliar painStop loading and refer to a qualified professional.
Readiness 70% or moreTrain as planned.
Readiness 60-69%Trim: drop a set or cut load 5-10%.
Readiness under 60%Cut: drop a set, cap effort at RPE 7, and lengthen rest. In a first session that already sits at RPE 5-6, that means dropping a set and resting longer.
Pain and readiness bands to read at minute 5-10.

The movement screen: five observations in 15 minutes

Each observation is one short, light set of 5-8 reps. You are looking, not scoring. Write what you saw in plain words ('back rounds on rep 4', 'left heel lifts at the bottom'), not a number out of three, and say nothing about the cause.

Five simple observations for the first session.
PatternAsk the client to doWatch for
Squat5 bodyweight squats to a box or bench, feet shoulder-width apartThe depth they reach, knee direction, heels, and trunk angle
Hinge5 hip hinges with hands sliding down the thighs, or to a raised benchWhether the back stays long or rounds, and how far the hips travel back
Push5-8 incline push-ups with hands on a benchShoulder blades, elbow path, ribs, and any pinch
Pull8 light cable or band rowsWhether the shoulders shrug up, and how the trunk moves
Carry or braceTwo farmer carries of about 20 m with light dumbbells, or 5 dead bugs a sidePosture, breathing, and whether one side drops
Five simple observations for the first session.

What you saw, what you do now

Five things you may see in the screen, what to do in the session, and when it becomes a referral.
What you sawWhat you do nowIt becomes a referral when
Cannot reach depthSquat to the box height they own and note the depth. With no pain, train that range and use a bench goblet squat as the next step. If pain stops them, score it and use the bandsA joint locks or gives way, or pain is above 7/10, or sharp, worsening, radiating, or unfamiliar
Knees caveLighten the load, slow the lowering, and cue 'push the floor apart'. Try a box squat or a slightly wider stance. Knee pain 3-5/10: reduce load or range first, then adjust the setup, then change the exerciseThe knee gives way or locks, swells, or pain is above 7/10, or sharp, worsening, radiating, or unfamiliar
Back rounds under a light hingeShorten the range to just above where it rounds and start from a raised position, hands on a bench. Do not load a hinge that rounds. Back pain 6-7/10: stop the movement that provokes it and choose a conservative alternativeNumbness, tingling, new weakness, or pain that radiates into a limb: stop loading and refer
Shoulder pinches overheadLeave overhead reaching out of today and use incline push-ups and rows. Score the pinch: 0-2/10 and familiar, continue and monitor. 3-5/10, reduce load or range first, then adjust the setup, then change the exercisePain above 7/10, or sharp, worsening, radiating, or unfamiliar, or any pain after a fall or impact
Breathless earlyStop, let them sit, and restart only when breathing settles. If it is plain unfitness, cut the block to 2 sets and rest 90-120 secondsChest pain or pressure, fainting, or severe breathlessness: stop and call emergency services. Dizziness, fever, unexplained weight loss, or fatigue lasting two weeks or more: stop loading and refer to a doctor
Five things you may see in the screen, what to do in the session, and when it becomes a referral.

The first training block: 25 minutes, light on purpose

The client should finish able to say they could have done more. Pick one exercise per pattern, using the version they owned in the screen.

Starting numbers for the first block. They are conventional starting points for a coach to adjust.
VariableStarting pointWhy
ExercisesOne per pattern, four or five in all: squat, hinge, push, pull, and a carry or braceCovers what you screened without adding new skills
Sets2-3, starting at 2 for anyone who has not trained in monthsTwo sets give you two looks at the same movement
Reps8-12 per setEnough practice at a load that is easy to control
EffortRPE 5-6, and no set ends with fewer than 4 reps in reserveThe client leaves wanting more, and the first soreness stays mild
LoadBodyweight, or the lightest load that still shows the patternYou are buying information, not training stimulus
Rest60-120 seconds, longer if breathing has not settledRecovery between sets, and time to coach
Starting numbers for the first block. They are conventional starting points for a coach to adjust.

New clients rate effort badly, so teach the scale first: at RPE 5 they could do about five more reps. The RPE scale for coaches has the wording, and RPE, RIR, or percentage of 1RM explains why early sessions use RPE and not a percentage.

What not to do in session one

Common first-session mistakes, what each one costs, and what to do instead.
Do notWhat it costsDo this instead
Test a one-rep max or a rep maxTechnique breaks at the limit, you learn little about a lift they have not practised, and the soreness arrives in session twoFind a working load at about 4 reps in reserve (RPE 6). It trains and measures in one set
Finish them offOne client too sore to move on day two starts to dread day threeEnd on an easy last set, so they leave with energy
Program a month of soreness: five days, ten new exercises, many setsA heavy first dose makes session two harder to sell, and new clients cannot tell good soreness from troubleKeep to 4-5 exercises and 2-3 sets, then add volume once you have seen how they recover
Skip the pain question because the form was cleanPain changes between the form and the session, after a fall or a bad night's sleepAsk again at minute 5-10 and use the bands
Diagnose out loud'Your hips are tight' becomes a belief you cannot support, and it sits outside coachingSay what you saw and what you will do about it
Common first-session mistakes, what each one costs, and what to do instead.

Example: one fictional client's first hour

This is an example, not a RaiNGE customer record. Sam is 52, works at a desk, and last trained about four years ago. The form says: goal 'lift my grandchildren and hike 10 km by June', left shoulder 2/10 and familiar when reaching overhead, and no to every PAR-Q+ question.

  1. 1

    0:00-0:05, welcome

    The goal is confirmed. Sam says the hike matters more, so the coach writes 'hike' above the card.

  2. 2

    0:05-0:10, readiness and pain

    Readiness is 75%, with poor sleep. That is 70% or more, so train as planned. The shoulder is 2/10 and familiar: continue and monitor. Status green.

  3. 3

    0:10-0:25, movement screen

    Squat to a bench: full depth, heels down. Hinge: the back rounds past knee height, so the coach notes it and shortens the range. Incline push-up: the shoulder reads 2/10, same as the form. Cable row: clean. Farmer carry, 20 m with 10 kg (22 lb) dumbbells: upright, steady.

  4. 4

    0:25-0:50, first block

    Bench squat 2×10 at bodyweight, with a third set added because the first two ended near RPE 5. Hinge from a raised bench position, bodyweight, 2×10. Incline push-up 2×8. Seated cable row 2×10 at 20 kg (44 lb). Farmer carry 3×20 m at 10 kg (22 lb) a hand. The shoulder stays at 2/10.

  5. 5

    0:50-1:00, close

    Sam is told to expect a dull ache in the legs and back for a day or two. Pain in a joint, a sharp pain, or a new spot is a message to the coach before session two. Session two is booked for Thursday, with one easy walk in between, and the coach writes the note.

The close: what to say before they leave

Before the client leaves

  • Say what tomorrow may feel like. A dull ache in the muscles worked, usually peaking a day or two later. The guide to training when sore has the three questions that separate soreness from pain.
  • Say what to do if it is pain. A joint, a sharp quality, a new spot, or a changed movement: message you before the next session. Chest pain or pressure, fainting, or severe breathlessness: stop and call emergency services.
  • Book session two before they leave. Two or three days later, so the first soreness has settled.
  • Give one thing to do in between. One easy walk beats a home program they will not do.
  • Write the note. What you saw in words, the loads, the RPE, the pain scores, and the exercises session two repeats.

Session two repeats this block, with a rep added only where session one was clean. The weeks that follow are laid out in the 12-week beginner strength program. In RaiNGE, drafts start from the intake context, such as goals, training history, equipment, schedule, and injury and pain notes, and you review, edit, and approve the plan before it reaches the client.

Common questions

How long should a first personal training session be?

Sixty minutes is the usual slot, and 45 works if you trim it: 5 for welcome, 5 for the readiness and pain check, 10 for a screen of three patterns, 20 for the block, and 5 to close. Cut patterns from the screen before you cut the pain check.

How sore should a new client be after the first session?

Mildly. On the soreness guide's scale, 0-3/10 is the range where you train as planned. Anything higher suggests the dose was too big, so drop a set in session two. One client who cannot move well two days later is a first-session mistake, not a good sign.

What if a new client cannot do a bodyweight squat?

Raise the box until they can sit down and stand up without using their hands, then lower it a little each week. If pain is what stops them, score it and use the bands. The goblet squat alternatives guide lists the next options when a goblet squat is too much.

What if a new client is nervous about training?

Open with something they can do well, such as a farmer carry or an incline push-up, and say what each block is before it starts. Let them pick the load on the first set, and point out the first thing they do well. Early confidence matters more than the first session's exercise list.

Next step

See the three-phase plan that takes a client from the first session through week 12.