Skip to content

Guide

How to write a warm-up for a client: raise, prepare, ramp in 5-10 minutes

Most warm-up advice is a list of stretches. This is a three-part template with a time budget, ramp sets worked out for a real load, and a library you write once and reuse.

By RaiNGE product teamUpdated 7 min read

Written for personal trainers who want a warm-up they can write into every session in a minute or two.

Short answer

Write a client warm-up in three parts: raise, prepare, ramp. Spend 2-3 minutes on easy movement to feel warmer, then 3-5 movements for the joints and patterns the session loads, then 2-4 lighter sets of the first main lift. Keep the total to 5-10 minutes, and about 5 in a 45-minute session.

  • Raise, prepare, ramp, in that order, written as one line on the session card.
  • Cap the warm-up by session length, and cut the prepare block first when time runs out.
  • Ramp only the first main lift of each pattern, from about 40% to about 80% of the working load.
  • Pain in the warm-up follows the pain bands. A warm-up does not clear pain.

Pair this warm-up with a full week of sessions that has progression, pain, and readiness rules. Use the program template

On this pageThe three parts, written as one line

The three parts, written as one line

Every warm-up has the same three parts in the same order, so you can write one in a minute and the client learns the routine. The sections below fill in the time, the ramp numbers, and a library of movements to choose from.

  1. 1

    Raise: 2-3 minutes of easy movement

    A bike, a rower, a brisk walk, or an easy incline on the treadmill, until the client feels warmer and breathes a little harder but can still talk in full sentences. This block is not training, so keep it easy.

  2. 2

    Prepare: 3-5 movements for what the session loads

    Pick movements for the joints and patterns in today's main lifts, one set of 5-8 slow reps each, bodyweight or a light band. Add mobility only where this client needs it, such as one stiff ankle or shoulder, not a full-body routine.

  3. 3

    Ramp: 2-4 lighter sets of the first main lift

    Work up to the working load in jumps, using the table below. Stop adding sets once the last ramp set feels easy and the working load looks right.

Write it as one line on the session card: Raise 2 min bike. Prepare box squat, glute bridge, hip hinge, band pull-apart. Ramp back squat, 3 sets. A line like that is all the client needs to run the warm-up while you set up the first lift.

The time budget, and the rule that keeps it from eating the session

The warm-up gets about a tenth of the session, up to an eighth on the heaviest day, and a hard cap of 10 minutes. A 45-minute session gets about 5 minutes, which is why the shorter session gets the shorter version of every block, not a skipped one.

Warm-up time by session length. Every figure is a starting point a coach adjusts.
Session lengthRaisePrepareRampTotal
45-60 minutes2 minutes3 movements, about 2 minutes2 sets, about 2 minutesAbout 5-6 minutes
60-75 minutes, or the heaviest day of the week3 minutes4 movements, about 3 minutes3-4 sets, about 3-4 minutesAbout 9-10 minutes
Warm-up time by session length. Every figure is a starting point a coach adjusts.

Time-box it with a clock, and when the cap is reached, start the first working set. If the warm-up runs long, cut in this order: drop the extra prepare movements first, then the lightest ramp set, then shorten the raise. Keep at least two ramp sets before a heavy first lift.

Ramp sets for the first main lift

Ramp sets are lighter sets of the first main lift that rise to the working load. A common starting point is about 40%, 60%, and 80% of the working load for 5, 3, and 1-2 reps, with brief rest of 30-60 seconds between sets, and up to 90 before the last one. The reps fall as the load rises, so the ramp builds toward the working set without tiring the client.

Example, not client data: one fictional client squats 80 kg (176 lb) for the working sets. The loads below are rounded to what a bar and standard plates can make.

An example ramp for a back squat with a working load of 80 kg (176 lb).
SetLoadShare of working loadRepsRest
Ramp 0, optional20 kg (44 lb), empty barAbout 25%830 seconds
Ramp 132.5 kg (72 lb)About 40%530-60 seconds
Ramp 247.5 kg (105 lb)About 60%330-60 seconds
Ramp 365 kg (143 lb)About 80%1-260-90 seconds
Working set 180 kg (176 lb)100%Per the programPer the program
An example ramp for a back squat with a working load of 80 kg (176 lb).

The empty-bar set is the first one to drop when time is short. The RPE scale guide describes a heavier version, three or four jumps ending near RPE 6-7 for five reps. Either works, and the lighter ramp here costs the client less. Only the first main lift of each pattern gets a ramp. A later lift in the same pattern, such as a leg press after squats, starts at its working load.

A library to write once and reuse

Write one prepare block for each session type, save it, and reuse it until the session changes. All of these are standard movements with no equipment beyond a bench, a light band, or a light dumbbell. In RaiNGE, a coach reviews, edits, and approves every program before it reaches the client.

Prepare movements by session type, and what to ramp.
Session typePrepare movements (pick 3-5)Ramp the first lift
Lower bodyBodyweight squat to a box, glute bridge, bodyweight hip hinge, bodyweight reverse lunge, calf raiseBack squat or trap bar deadlift, 2-4 ramp sets
Upper push-pullBand pull-apart, scapular push-up, incline push-up, light band row, band external rotationBench press or row, 2-4 ramp sets
Full bodyBodyweight squat to a box, bodyweight hip hinge, incline push-up, light band row, dead bugThe first lift on the card, 2-3 ramp sets
ConditioningBodyweight squat, walking lunge, high-knee march, light kettlebell deadlift, plankThe first interval at an easy pace for 1-2 minutes
Prepare movements by session type, and what to ramp.

A new client's first session starts with a movement screen instead, and the screen can double as the prepare block. If a goblet squat is too much for the ramp, the goblet squat alternatives guide lists the next options.

Modify the warm-up for a flagged client

Ask pain and readiness before the first movement, and ask pain again after the last ramp set. A warm-up does not make a painful movement safe, and nothing here promises that a warm-up prevents injury. Use the bands as written.

Pain and readiness bands, and what each means for the warm-up.
ReportRuleIn the warm-up
Pain 0-2/10 and familiarContinue and monitor.Run the usual warm-up and note the score
Pain 3-5/10Reduce load or range first, then adjust the setup, then change the exercise.Shorten the range on the prepare movement, or lighten the ramp, before swapping anything
Pain 6-7/10Stop the movement that provokes it and choose a conservative alternative.Drop that movement from the prepare block and do not ramp that lift
Pain above 7/10, or sharp, worsening, radiating, or unfamiliar painStop loading and refer to a qualified professional.End the warm-up and do not move to working sets
Readiness 70% or moreTrain as planned.Run the full warm-up
Readiness 60-69%Trim: drop a set or cut load 5-10%.Keep the ramp and drop the empty-bar set
Readiness under 60%Cut: drop a set, cap effort at RPE 7, and lengthen rest.Keep the raise easy, drop the empty-bar set, and rest longer between ramp sets
Pain and readiness bands, and what each means for the warm-up.

What not to do in a warm-up

Common warm-up mistakes, what each one costs, and what to do instead.
Do notWhat it costsDo this instead
Run a long static stretching routineTen minutes of holds is more than a fifth of a 45-minute session, and the working sets are what the client came forSpend the time inside the prepare block on the one joint this client needs
Ramp a bodyweight-only exercise with setsRamp sets of push-ups or bodyweight squats add time without adding a load to build towardMake the first set of the exercise easy, a few reps short of the plan, and count it as the ramp
Tire the client before the work startsBreathing hard after the raise, or ramp sets that feel like work, leave less for the first working setCut the empty-bar set or an extra prepare movement, and keep every warm-up set easy
Skip the ramp before a heavy first liftThe first working set becomes the warm-up, and you lose the chance to check the loadKeep at least two ramp sets, and drop the prepare movements first when time is short
Copy one warm-up onto every sessionAn upper-body prepare block leaves out the hips and ankles that a lower-body day loadsChoose the prepare block from the session type in the library
Common warm-up mistakes, what each one costs, and what to do instead.

Common questions

What if the client arrives late for a session?

Cut the raise to 1 minute, drop the prepare block to two movements for the joints the first lift loads, and keep the ramp for the first main lift. Do not trim the ramp before a heavy lift. If the client arrives with 30 minutes left, drop the empty-bar set too.

Do you warm up before every exercise in the session?

No. Ramp the first main lift of each pattern and let the warm-up carry the rest. A later lift in the same pattern starts at its working load. A heavy lift in a different pattern, such as a deadlift after bench press, gets one or two ramp sets of its own.

Does a beginner need ramp sets?

In spirit, yes. When the working load is bodyweight or a light dumbbell, the first set of the exercise at a few reps short of the plan is the ramp, with no separate sets. Add formal ramp sets once the load is heavy enough that the first working set is a real step up.

Next step

Pair this warm-up with a full week of sessions that has progression, pain, and readiness rules.