Skip to content

Guide

How to choose a training split: plan for the days a client completes in a bad week

Most split advice starts with muscle groups. This guide starts with attendance: pick the structure the client will complete in a rough week, then adjust for the constraint in front of you.

By RaiNGE product teamUpdated 5 min read

Written for coaches choosing a weekly structure for a new client.

Short answer

Choose a training split from the days a client completes in a bad week. Two reliable days call for full-body A and B, three for full body with heavy, light, and medium days, four for upper/lower, and five or six only after a full block at four. Aim for every movement pattern twice a week.

  • Ask for the fewest days the client trained in a recent rough week, and write the plan for that number. Extra days are optional.
  • Every movement pattern should train at least twice in the rough week. Extra days only add exposures and sets.
  • Change the split for the constraint: shorter sessions for a busy week, full body after a layoff, and sessions placed around games in season.

Share one client's goal, experience, and equipment, and RaiNGE emails you a sample session draft to review. Get a free sample workout

On this pageThe rule: write the plan for the rough week

The rule: write the plan for the rough week

Take a client who promises four days and manages two. The plan was written for the wrong week. Ask about the rough week, write the plan for that number of days, and list anything above it as optional.

Ask at intake

  • In the last month, what was the fewest days you trained in one week, and what got in the way?
  • On those days, how long could a session run?
  • Which days are fixed, such as shift work, games, or school pickups?

Then count how often each movement pattern trains in that rough week: squat, hinge, push, pull, and carry or trunk. Twice is the usual target, because it spaces practice and recovery. Once a week can hold what a client has but builds slowly, so a split that leaves a pattern at once in the rough week needs a different shape, such as full-body sessions.

Choose the split by reliable days a week

Training split by reliable days a week, with how often each pattern trains and why.
Reliable daysSplitEach pattern per weekWhy it fits
2 daysFull body A and B2 timesThe shortest week that trains every pattern twice. Keep each session to 45-60 minutes so both days survive a busy week
3 daysFull body: a heavy, a light, and a medium day3 timesMiss a day and every pattern still trains twice. The usual answer for general-fitness clients
4 daysUpper/lower, each half twice2 timesMore sets for each muscle in a session of the same length. Miss a day and half the body trains once, so use it only when four days hold
5-6 daysFive: upper, lower, push, pull, legs. Six: push/pull/legs twice through2 timesThe most weekly sets and no slack: any missed day drops a pattern to once. Add the fifth day only after a full block of completed four-day weeks
Training split by reliable days a week, with how often each pattern trains and why.

Programs to start from: the 3-day full body program includes a two-day fallback week, the 4-day upper lower split covers four days, and the dumbbell only workout program is the three-day week for clients with only dumbbells. Download the training split decision card (PDF) for the days-per-week table, the constraint table, and the pain and readiness bands on a printable card. For muscle gain on four days, the 12-week hypertrophy program runs the upper/lower week, and for a sport, the basketball off-season program includes an in-season version.

Adjust the split for the constraint in front of you

The days-per-week table sets the frame. A constraint changes what goes inside it: the session length, the effort cap, or where the sessions fall in the week.

What to change for five common client constraints.
ConstraintWhat to changeWatch for
Very busyTwo full-body sessions of 30-40 minutes with four exercises each: a squat, a hinge, a push, and a pull. A carry finishes the session only if time allows. Offer a third session of 20-30 minutes on good weeksThe extra session turning into a requirement
Returning from a layoffFull body on two or three days at RPE 5-6 for the first two weeks, then RPE 7 as soreness settles. Add a fourth day only after four weeks of full attendance. After a year or more off, start the 12-week beginner strength programSoreness that lasts into the next session
Wants to add muscleTrain each muscle at least twice a week and start near 10 hard sets (RPE 7 or higher) per large muscle group per week, fewer for the arms, shoulders, and calves. Add a set at a time while recovery holds. Four-day upper/lower is the usual frame when four days hold, and three full-body days when they do notAdding days before adding sets
Trains around an injury flagKeep the split. Swap the exercises the flag rules out, note each change for coach review, and apply the pain bands before any progressionPain that changes how the client moves
Team sport in seasonTwo full-body sessions of 30-40 minutes. Keep the loads, cut each lift to 2-3 sets, and put the heavier session at least two days before the next gameA fixture list that moves the days each week
What to change for five common client constraints.

Worked example: three clients who all say four days

These three are composites of common intake answers, not real clients. Each says they will train four days a week, and the coach asks the intake questions above.

Three clients, three rough weeks, and the split each one gets.
ClientRough weekPlanEach pattern per week
Priya, 41, shift nurse2 days, with sessions of up to 45 minutesFull body A and B at 45 minutes each. A third full-body session is optional on days off2 times in a rough week, 3 in a good one
Marcus, 29, accountant3 days, with a fourth in most weeksFull body with heavy, light, and medium days. The fourth day is an optional 30-minute conditioning session3 times either way
Dev, 24, three years of lifting4 daysUpper/lower, each half twice. A fifth day is a short optional arms-and-shoulders session2 times either way
Three clients, three rough weeks, and the split each one gets.

The optional days only add. Take them away and every pattern still trains at least twice, which is the test for a good plan: it survives losing its extras.

In RaiNGE, drafts start from client context that includes the schedule, along with goals, training history, equipment, injury and pain notes, and readiness check-ins. AI output is a draft: a coach reviews, edits, and approves the program before it reaches the client.

Common questions

Is push pull legs better than upper lower?

Neither is better on its own; they fit different weeks. Push/pull/legs run once is three days and trains each pattern once a week, so coaches usually run it twice, which takes six days. Upper/lower trains each half twice in four days. Match the split to the days the client completes.

When should a client move to a different split?

At a block boundary, after the client has completed the new number of days for four to six weeks, or when the schedule changes for good, such as a new job or a new baby. Change the split and keep the main lifts the same, so the log still compares across blocks.

Do body-part splits still make sense?

For most clients, no. Training one muscle per day means each muscle trains once a week, so one missed day leaves it untrained for two weeks. They can suit experienced lifters who rarely miss a session, but they are a poor fit for a plan written for the rough week.

Next step

Share one client's goal, experience, and equipment, and RaiNGE emails you a sample session draft to review.